Service
U-Line water inlet valve and supply repair
Everything between the shut-off and the reservoir. The maker's own indicator for it says four words — lights up to indicate low water supply — so the work is finding which link in the chain is short. These machines mind flow rather than pressure, which is why a filter at the end of its life starves one slowly enough that nothing ever looks wrong.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
Before you read on
What this job costs and how it is agreed
A starting figure, not a quote. What moves it is the model, how the unit is built in and which part it needs — settled after the on-site diagnostic.
Starts at
from $155
After a diagnostic from $95, which comes off the bill when you go ahead.
or call (305) 851-2207
Diagnostic
From $95, credited to the repair
The price
In writing, before anything is opened
Warranty
On the labor we performed
On the visit
How this visit actually goes
The same order every time, so nothing is opened and nothing is charged before you have seen the figure and said yes.
-
01
Start at the shut-off
Behind or under a built-in machine, and closed during other work more often than anybody admits. It costs nothing to check and it is the answer surprisingly often.
-
02
Then the filter
A filter does not fail, it slows. A machine that makes less ice each month rather than stopping is describing a filter.
-
03
Then the line
The manual warns during installation not to pull or bend the hose. A machine slid out for cleaning and pushed back is exactly how a kink arrives.
-
04
Then the valve and the level sensing
If water is arriving and the machine still says it is not, the inlet valve or the level sensing in the reservoir is next, and that is the part of this job that needs a visit.
Applies to
The U-Line units we carry this work out on
-
10 models · crescent ice · U-Line's oldest line U-Line ice maker repair in Miami
10 crescent ice makers and combination refrigerator/ice makers. U-Line has been building these since 1962 and they are the simplest cold appliance in the range: a fill valve, a mold, a heater to release the ice, and a mechanical arm that stops the machine when the bin is full. When one stops, the cause is nearly always water arriving, water leaving, or the harvest sticking.
- Crescent cubes, mechanical harvest, bin arm
- Water problems outnumber everything else
- No service menu on most of them
-
6 models · clear ice, craft ice and nugget U-Line ice machine repair in Miami
6 ice machines — clear ice, craft clear ice and nugget — and they are a different appliance from a crescent ice maker. Clear ice is made by freezing moving water slowly; nugget ice is made by driving a screw through ice on the wall of a cylinder. Both have a water circuit, a harvest and, on most installations, a drain. Anything that interrupts the water changes the ice before it stops the machine.
- Clear, craft and nugget — three different machines
- The ice itself is evidence before anything fails
- Scale is what ends them in this climate
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name