Error code
U-Line error code No Comm
U-Line error code No Comm: The unit lost communication with its display. Which machines can actually raise it, where the number lives on this make, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code No Comm, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
No Comm
The unit lost communication with its display. Unlike the E numbers on the rest of this make, this one is shown to you: the 3000 Series monitors its inputs continuously and puts the notification on the user interface rather than only into a service log. The control is still running the refrigeration; what has gone is the link between the main board and the user interface in the door.
or call (305) 851-2207
What it narrows down to
The display has stopped answering the board
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the beverage centers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Door 1, the upper door on a two-door
Door 2 — the lower door of a
Thermistor 1 open. In plain terms, the cabinet
Thermistor 2 open. In plain terms, the evaporator
Thermistor 3 open. In plain terms, the third
Thermistor 1 shorted. In plain terms, the cabinet
Thermistor 2 shorted. In plain terms, the evaporator
Thermistor 3 shorted. In plain terms, the third
The cabinet sensor circuit is open
The evaporator sensor circuit is open
The room sensor circuit is open
The cabinet sensor circuit is shorted
The same digits mean different things on different equipment. Search the full code list
In more detail
About U-Line error code No Comm
What No Comm means, in the maker's own words
The unit lost communication with its display. Unlike the E numbers on the rest of this make, this one is shown to you: the 3000 Series monitors its inputs continuously and puts the notification on the user interface rather than only into a service log. The control is still running the refrigeration; what has gone is the link between the main board and the user interface in the door.
Quoted rather than interpreted
No Comm — Unit lost communication to the display. Disconnect and reconnect power to unit. Contact Customer Care if persistent.
From ERROR NOTIFICATION table, 3000 Series User Guide, in a User Guide & Service Manual downloaded from U-Line's own site. Nothing on this page is decoded beyond what that sentence says.
Where this notification actually lives
On your display, which on this make is the exception rather than the rule. The 3000 Series does not use the E numbers at all: it watches its inputs continuously and writes the notification on the user interface in plain words, so there is no hidden log to open and no key to hold. Every other U-Line in this catalog does the opposite — it logs the number in memory and shows you nothing but the door. If you are reading a phrase rather than a number, this is the series you own.
What to do about it
- Disconnect power at the outlet or the breaker, wait, and reconnect. A power cycle is the maker's own first instruction for this notification, and it clears a link that dropped once.
- If it comes back, the problem is the customer interface or the data cable that reaches it. The service guide is blunt about the repair: inspect the UI and data cable, and if defective, replace the entire door.
- That is why this one is worth a call before a part order — on this series the cable is not sold separately from the door it runs through.
- Meanwhile the cabinet still cools. A No Comm unit holding its temperature is not an emergency; one that is also warming is two problems and gets diagnosed as two.
Where this goes next
The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 851-2207 and describe what the display is doing before booking anything.
u line 3000 series no comm error names a notification the 3000 Series puts on the display itself, which is what makes it different from every other number this maker logs.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards