U-LineRepair Miami

Error code

U-Line: The NO WATER lamp is lit and the ice has stopped

U-Line — an indicator rather than a code. The maker's own line is four words long: lights up to indicate low water supply.

  • From $95 diagnostic, credited to the repair
  • 59 cities and neighborhoods covered
  • OEM parts available on order
  • In writing the price, before anything is opened

What we can confirm

Code The NO WATER lamp is lit, from the manufacturer's own documentation

This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.

The code

The NO WATER lamp is lit

The maker's own line is four words long: lights up to indicate low water supply. That is the whole documented meaning, and it is enough to work with — the machine has stopped because it is not getting water, and everything between the wall and the reservoir is a candidate.

What it narrows down to

The maker's own line is four words long:

Diagnostic

From $95, credited to the repair

On the same appliance

What else belongs to the ice machines

On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.

Other codes this appliance can display

Door 1, the upper door on a two-door

Door 2 — the lower door of a

Door 2 open. Worth its own page for

Thermistor 1 open. In plain terms, the cabinet

Thermistor 2 open. In plain terms, the evaporator

Thermistor 1 shorted. In plain terms, the cabinet

Thermistor 2 shorted. In plain terms, the evaporator

The drain pump circuit is open. The maker

Thermistor 4 open. In plain terms, the fourth

Thermistor 4 shorted. In plain terms, the same

Water level (tray or reservoir) high. In plain

Water level low. In plain terms, the water

The same digits mean different things on different equipment. Search the full code list

In more detail

About U-Line: The NO WATER lamp is lit and the ice has stopped

What the appliance is actually doing

The maker's own line is four words long: lights up to indicate low water supply. That is the whole documented meaning, and it is enough to work with — the machine has stopped because it is not getting water, and everything between the wall and the reservoir is a candidate.

Quoted rather than interpreted

No Water Lamp: Lights up to indicate low water supply.

From Control Operation, in a User Guide & Service Manual downloaded from U-Line's own site. Nothing on this page is decoded beyond what that sentence says.

What to do about it

  1. Check the shut-off valve. On a built-in machine it is behind or under the unit and it gets closed during other work more often than anybody admits.
  2. Check the filter. A filter at the end of its life does not stop the water, it slows it, and these machines mind flow more than pressure.
  3. Look for a kink. The manual warns during installation not to pull or bend the hose, and a machine that has been slid out for cleaning and pushed back is exactly how that happens.
  4. If water is arriving and the lamp is still lit, the level sensing in the reservoir is next, and that is a visit rather than a check.

Where this goes next

The job this usually becomes is water inlet valve and supply repair, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 851-2207 and describe what the display is doing before booking anything.

u line ice maker not making ice with this lamp lit is a water problem before it is an ice-making problem, and the first three checks cost nothing.

This article is based on:

  • Official manufacturer documentation
  • Internal repair procedures
  • Technician repair history
  • Company quality standards

Tell us the model number and what it is doing.

Call (305) 851-2207